Simatic S7 error- and statuscodes
| Status codes | Text | notes and example call functions |
|---|---|---|
| 0000 | No error / Instruction executed without errors | general |
| 0001 | Connection established | general |
| 0003 | Connection terminated | general |
| 7000 | #no job active AND no connection established (REQ=0, DISCONNECT=1) | general |
| 7001 | Start of job processing / Connection establishment triggered | general, BUSY = 1, DONE = 0. |
| 7002 | Intermediate call. Connection is being established | general, BUSY has the value 1. |
| 7003 | Connection is being terminated | general |
| 7004 | Connection established AND monitored. No job processing active. | general |
| 7005 | data is being sent. | general |
| 7006 | data is being received. | general |
| 8x3A | Invalid pointer at parameter x. | |
| 8070 | All internal instance memories are in use. | |
| 8080 | The identifier entered for the communications port is invalid. | |
| 8081 | Timeout, module error, internal error. | |
| 8082 | Parameter assignment failed because parameter assignment is currently being performed in the background. | |
| 8083 | Buffer overflow: The CM or CB has returned a receipt message with a length that is greater than permitted by the length parameter. | |
| 8085 | Error specifying the length at the LENGHT parameter. The specified length is 0 or greater than the maximum permitted value. | |
| 8085 | The connection ID (ID parameter) is already in use by a configured connection. | TCON |
| 8085 | - LEN parameter is greater than the largest allowable value (For S7‑1200: 8192; for S7‑1500 (TCP): 65536; with S7‑1500 (FDL): 240 / 236) - Parameter DATA and LEN both have the value 0. - The value of the LEN or DATA parameter was changed after the first call. | TSEND TRCV |
| 8086 | The ID parameter is out of range (1 .. 0x0FFF). | TCON TSEND TRCV |
| 8087 | Maximum number of connections reached, no further connection possible. | TCON |
| 8088 | - LEN parameter is larger than the range specified in DATA. - Receive area is too small. | TSEND TRCV |
| 8089 | The CONNECT parameter does not point to a connection description or the connection description was created manually. | TCON |
| 8090 | Message length invalid, module invalid, message invalid. | |
| 8091 | Incorrect version in parameterization message. | |
| 8092 | Invalid record length in parameterization message. | |
| 8092 | The source or target area is only available in the load memory. | BLKMOV |
| 809A | The structure at the CONNECT parameter is not supported on an integrated interface or the length is invalid. | TCON |
| 809B | The InterfaceId element within the TCON_xxx structure does not reference a hardware ID of a CPU or CM/CP interface or has the value 0. | TCON |
| 80A1 | The specified connection or port is already in use. | TCON |
| 80A1 | Communication error: - The specified connection has not yet been established. - The specified connection is being terminated. Transmission via this connection is not possible. - The interface is reinitialized. | TSEND TRCV |
| 80A2 | Local or remote port is used by the system. The following ports are reserved locally: 20, 21, 80, 102, 135, 161, 162, 443, 34962, 34963, 34964 and the range 49152 to 65535. | TCON |
| 80A3 | ID is used by a connection created by the user program that also uses the same connection description at the CONNECT parameter. | TCON |
| 80A3 | An attempt is being made to terminate a non-existent connection or the connection has already been terminated. | TDISCON |
| 80A4 | IP address of the remote endpoint of the connection is invalid or it matches the IP address of the local partner. | TCON |
| 80A4 | Temporary communication error: The interface is being reconfigured or the connection is being set up. | TDISCON |
| 80A7 | Communication error: You executed TDISCON before TCON was completed. | TCON |
| 80B1 | You changed the DATA parameter before the current job ended. | TSEND |
| 80B3 | The parameterized protocol variant (parameter ConnectionType in the connection description) is UDP. Please use the TUSEND / TURCV instruction for a UDP connection. | TSEND TRCV |
| 80B4 | Only with TCON_IP_RFC: The local T-Selector was not specified or the first byte does not contain the value 0x0E (only with a length of T-Selector = 2) or the local T-Selector begins with SIMATIC-. | TCON |
| 80B5 | With connection type 13 = UDP, only passive connection establishment is permitted (ActiveEstablished parameter of the TCON_IP_v4 / TCON_PARAM structure has the value TRUE). | TCON |
| 80B6 | Parameterization error in the ConnectionType parameter of the data block for the connection description. - Only valid for TCON_IP_v4: 0x11, 0x0B and 0x13. - Only valid for TCON_IP_RFC: 0x0C and 0x12 | TCON |
| 80B7 | For TCON_IP_v4: - TCP (active connection establishment): Remote port is 0. - TCP (passive connection establishment): Local port is 0. - UDP: Local port is 0. - Partner endpoint IP address was set to 0.0.0.0. For TCON_IP_RFC: - Local (LocalTSelector) or remote (RemoteTSelector) T-selector specified with a length greater than 32 bytes. - A length greater than 32 was entered for TSelLength of the T-selector (local or remote). - Error in the length of the IP address of the respective connection partner. - Partner endpoint IP address was set to 0.0.0.0. | TCON |
| 80B8 | The ID parameter in the local connection description (structure at the CONNECT parameter) and the ID parameter of the statement are different. | TCON |
| 80BB | Invalid value at ActiveEstablished parameter. | |
| 80C3 | All connection resources are in use or ports may be in dynamic use by other applications or connections. | TCON TRCV |
| 80C3 | - A block with this ID is already being processed in another priority group. - Internal lack of resources. | TSEND |
| 80C4 | Temporary communication error: - The connection cannot be established at the moment. - The connection cannot be established because firewalls on the connection path are not enabled for the required ports. - The interface is receiving new parameters. - The configured connection is currently being removed by a TDISCON instruction. | TCON TSEND TRCV |
| 80C5 | The connection partner refuses to establish the connection, cleared down the connection or actively ended it. | TCON |
| 80C5 | - Connection terminated by the communication partner. - LSAP of the remote connection partner not released | TSEND TRCV |
| 80C6 | The connection partner cannot be reached (network error). | TCON TSEND TRCV |
| 80C7 | Execution timed out. | TCON TRCV |
| 80C8 | #no response OF the server in the defined period. | |
| 80C8 | Value at the ID parameter is already being used by a connection that was created via the user program. The connection uses the same ID but different connection settings on the CONNECT parameter. | TCON |
| 80C9 | Connection partner validation failed. The connection partner who wants to establish a connection does not correspond to the partner defined in the structure at the CONNECT parameter. | TCON |
| 80C9 | The length of the receive area is smaller than the length of the sent data. | TRCV |
| 80CE | The IP address of the local interface is 0.0.0.0 | TCON |
| 80D0 | Related to TCP and the active connection endpoint: The remote_qdn parameter is an empty string. In this case no connection can be established. | TCON |
| 80D1 | The remote_qdn parameter is not a fully qualified domain name. Possibly the dot is missing at the end. | TCON |
| 80D2 | There is no DNS server address configured. | TCON |
| 80D3 | The fully qualified domain name could not be resolved. Possible causes: - The DNS server cannot be reached, e.g. B. because it is down or the remote port is unreachable. - An error occurred while communicating with the DNS server. - The DNS server returned a valid DNS response, but the response did not contain an IPv4 address. | TCON |
| 80E0 | Inappropriate or bad message was received. | TCON |
| 80E1 | Error during handshake. Possible causes: - Canceled by user - Security not high enough - Renegotiation is not supported - SSL/TLS version is not supported - Hostname validation failed | TCON |
| 80E2 | Unsupported / Invalid Certificate - Possible cause: The time of the module concerned has not been set or the module is not synchronized. | TCON |
| 80E3 | Certificate has been discarded. | TCON |
| 80E4 | No valid certificate authority was found. | TCON |
| 80E5 | Certificate expired. | TCON |
| 80E6 | Integrity error in transport layer security protocol. | TCON |
| 80E7 | Unsupported extension in X.509 V3 certificate. | TCON |
| 80E9 | TLS server without server certificate is not supported. | TCON |
| 80EA | DTLS (UDP) protocol is not supported. | TCON |
| 80EB | A client cannot request a client certificate. | TCON |
| 80EC | The server cannot validate against the subjectAlternateName (Only clients can do that.) | TCON |
| 80ED | TLSServerCertRef_m ID not valid | TCON |
| 80EE | Handshake not finished yet | TSEND |
| 8152 | The WSTRING, WCHAR, BOOL, ARRAY of STRING, ARRAY of WSTRING and ARRAY of WCHAR data types are not supported at the SRCBLK parameter. | BLKMOV |
| 8187 | the MB_HOLD_REG parameter has an Invalid Pointer. Data area is too small. | |
| 8352 | The WSTRING, WCHAR, BOOL, ARRAY of STRING, ARRAY of WSTRING and ARRAY of WCHAR data types are not supported at the DSTBLK parameter. | BLKMOV |
| 8380 | received Modbus frame has incorrect format OR too few bytes were received. | |
| 8381 | Function code is NOT supported. | |
| 8382 | the length OF the Modbus frame in the frame header does NOT match the number OF received bytes. | |
| 8383 | #error reading OR writing data OR access outside the address area | |
| 8384 | Invalid exception code received. | |
| 8385 | Diagnostics code NOT supported. | |
| 8386 | received function code does NOT match the one sent originally. | |
| 8387 | the protocol ID OF the Modbus TCP frame received BY the server is NOT 0. | |
| 8388 | the Modbus server sent a different data length than was requested. | |
| 8389 | Invalid data area definition | |
| 80B6 | Invalid connection type, only TCP connections are supported. | |
| 80BB | Invalid value at ActiveEstablished parameter | |
| 8188 | the MB_MODE parameter has an Invalid value. | |
| 8189 | Invalid addressing OF data at the MB_DATA_ADDR parameter. | |
| 818A | Invalid data length at the MB_DATA_LEN parameter. | |
| 818B | the MB_DATA_PTR parameter has an Invalid Pointer. | |
| 818C | Timeout at parameter BLOCKED_PROC_TIMEOUT OR RCV_TIMEOUT | |
| 8200 | A different Modbus request is currently being processed via the PORT. | |